AVer NXU8000 - Manual (Page 135)

123
date and time block to set the connection schedule.
 I/O Control: To setup the sensor and relay devices that is installed on IP camera.
 Sensor Setting: To setup sensor that is embedded on the camera.
1. Click the drop-down list and select the sensor ID number.
2. Enter sensor name in Name column
3. The system automatically detects the camera and input relates information. In the
Content section, enter sensor description.
4. In the test section, click Test to check the sensor status. Red is high and Green is
low.
5. Click OK to exit and accept the setting and Cancel to exit without saving the
setting.