AVer NXU8000 - Manual (Page 263)

251
DVR Setup
Add the DVR servers for monitoring.
i
iMatrix only supports 16 DVR servers
To Add and Remove DVR Server
1. Click Setup.
2. In the Authorization dialog box, enter the administrator User ID and Password.
3. Click DVR.
4. In the DVR Setup section, click Add to insert, Delete to remove and Edit to modify DVR server
setting.
5. To continue adding a DVR, in the text box, enter the name, IP/Domain, Login User, Password,
Confirm Password of the remote DVR server.
6. Select the Video Quality for video display on the iMatrix system monitor screen. When the video
quality is high, user can enable Show POS message box and the POS message will also
display on the iMatrix system monitor screen.
7. Click OK to accept the new setting and Cancel to exit without saving the new setting.
8. And then, the iMatrix system will try to connect with DVR server. If the connecting time takes too
long, user can click Disconnect button to cancel the connect action.