AVer NXU8000 - Manual (Page 198)

186
Chapter 8 Using the Remote Programs
You can use Microsoft Internet Explorer to access DVR server by entering the IP address or domain
name. To use this feature, make sure that you are connected to the internet and the Network feature is
enabled.
i The DVR site needs to enable Network. To enable DVR network, please refer to Chapter
4.3#(6) .
Accessing this feature for the first time you will be prompted by your browser to install PCVeiwX.cab,
allow the installation and you should be able to connect and login afterwards.
Click Install when the Internet Explorer - Security Warning dialog box appears.
After installing the PCViewX.cab and when connecting to the DVR server, you are required to enter
User ID, password and select the network type. After login, the PCViewer interface is displayed.
i If you are not in a LAN network environment, remote playback video may be un-smooth
due to network speed limitation. Slow network transmission speed may possibly cause
system performance drop as well.
Control Panel of PCViewer
Display screen of PCViewer
PCViewer
version