AVer NXU8000 - Manual (Page 51)

39
4.3.2 Network Setting Wizard
Setup the IP address of DVR and configure the DDNS. After completed all configuration, click Next to
save the setting and go to next wizard setting.
1. LAN: Select IP address mode -- DHCP or Static IP.
 DHCP: To use DHCP server assigning DVR server an IP address.
 Static IP: Assign a fixed IP address for DVR server
- IP ADDRESS: Assign a constant IP address which a real IP addresses give from ISP to
DVR system.
i
Do Not assign the DVR to 1.0.0.0 network segment. It will cause the DVR cannot
access to Internet due to the un-recognize to 1.0.0.0 IP segment.
- Mask: It is a bitmask used to identify the sub network and how many bits provide room for
host addresses. Enter the subnet mask of the IP address which user has assigned to DVR
system.
- GATEWAY: A network device act as a passageway to internet. Enter the network gateway
IP address
- DNS: Domain Name Server translates domain names (such as www.abb.com.tw) to IP
addresses. Enter the IP address of DNS if it is available.
2. DDNS setting: To use this feature, go to http://ddns.avers.com.tw or http://dyndns.org and
register.
i
The DDNS setting is not required to setup if user hasn’t apply your domain name yet.
The green light
indicates the LAN
port is connected
with Ethernet cable.