Amiliarizing the, Emote, Onsole – AVer NXU8000 User Manual
Page 229: Uttons, Chapter 8.2, 2 familiarizing the remote console buttons
217
8.2 Familiarizing the Remote Console Buttons
Remote Console application can be installed from Software CD, too.
Name
Function
(1) Exit
Close the Remote Console.
(2) Split Screen
Mode
Select from 6 different split screen type to playback the recorded video file of
all the camera, or one camera over the other or alongside on a single
screen.
i
If there are only 4 cameras, you won’t be able to switch to 9, 16, and 13 split
screen mode.
To change the video quality, right-click on the screen and select between High,
Normal or Low.
(3) Record
Start/stop video recording.
(4) Emap
Display the map in each area, the camera/sensor/relay location and the
warning event. (see also
(5) Network
Enable/disable remote system access. This feature allows you to access
DVR server from a remote location via internet connection.
(6) Setup
Configure the Remote Console setting. (see also
(7) PTZ
Access PTZ control panel. Beside PTZ camera, DVR system also support
mega pixel IP camera.(see
(8) Preview
Switch to Preview/Advanced mode. This allows you to view live camera
display.
(9) Playback
Switch to Playback mode. This allows you to view the recorded video file.
(see
(10) Status Bar
Display the current date, time and hard disk free space.
(11) Camera ID
Show the number of cameras that are being viewed. When you are in single
screen mode, click the camera ID number to switch and view other camera.