AVer NXU8000 - Manual (Page 152)

140
5.2.7 IP camera PnP Setup
To connect AVer IP camera series without any configuration; just easy as plug and play.
i - The IP camera PnP setup now supports AVer SF2012 and SF2111H series IP camera.
- The IP camera must be in factory default setting. To reset back to factory default
setting, please refer to user manual of IP camera.
1. Please make sure the IP camera is reset to factory default and is installed properly on your LAN
network.
2. Click IP Cam Pnp setup button.
3. IP Cam Pnp Setup dialog, the Search Total Channel displays number of Aver IP cameras were
found by DVR/NVR system.
4. User can select the channel to connect the AVer IP cameras that were found by DVR/NVR system.
If there are available channels, the channels will be marked as a suggestion for IP camera
connection.
5. Click OK to connect the IP camera. User should see the video displays on the channel screen.