AVer NXU8000 - Manual (Page 120)

108
5.1.1 To Set the POS Setting
General Setting
1. In the System Setting dialog box, POS section, click Setting.
2. In the POS Console Setting dialog box, click Add to set a new POS setting, Modify to change the
POS setting, and Delete to remove the selected POS setting. Click OK to save and close POS
Console Setting.
3. In the POS Mapping dialog box, click OK to accept the settings and Cancel to exit without saving
the new setting.
(1)
(2)
(3)
(6)
(7)
(8)
(4)
(5)
(1) POS Name: Enter a name to identify the POS.