AVer NXU8000 User Manual
Page 223
211
- Backup
Save another copy of all the data at the set time and specified backup path. DVR automatically
updates and only backup the data that are not yet included in the archive.
To assign backup path, click
.
Mirror Backup: Save a copy of all the data at the set time and specified backup path.
Incremental Backup: Only backup the data that are not yet included in the archive from
last time.
i
Make sure the backup folder and storage folder are not on the same drive.
- Network
Activate DVR remote system to access at the set time. After the appointed time, the Network
function will be disabled. If the Network function is already enabled, the Network function will
not be disabled when the appointed time has ended.
- Reboot
Restart the PC at the appointed time.
i
Make sure the Windows operating system is set NOT to require you to login user name
and password. This way the system will be able to run DVR program.
- Disable Alarm
Deactivate the alarm at the set time temporarily.
3. Specify to either schedule it weekly or one time. Click to make a selection.
4. Click on the blocks to set the schedule (see also
). Or click All to select all. To store
the setting, click Save. To remove the settings, click Clear.
5. To end Schedule Setting, click Update to exit and accept the setting and Exit to exit without
saving the setting.