Av connection cable – AVer NXU8000 User Manual
Page 32
20
2.6.2
Connecting the Cameras, a TV and Audio devices to NV6000T
4. Use the supplied AV connection cable and connect it to the D-type AV IN port of NV6000T card
(see
NV6000T card parts
).
5. Connect the cameras to the BNC video connectors and audio devices to the RCA audio
connectors. Just follow the order basing on the marked sequence.
6. Connect one end of the RCA video cable (not supplied) to the TV OUT port of NV6000T card and
the other end to the TV video input port. If you are not sure, please refer to the TV user manual.
NV6000 T
MIC 3
MIC 2
MIC 4
MIC 5
MIC 6
MIC 7
MIC 8
MIC 1
RC A cable
Television
AV connection cable
MIC 3
MIC 2
MIC 4
MIC 5
MIC 6
MIC 7
MIC 8
MIC 1
i
The DVR system supports both analog and IP camera channel for TV output.
This manual is related to the following products: