To setup external i/o box – AVer NXU8000 User Manual
Page 170
158
5.8.1
To Setup External I/O Box
i
NVR server needs to purchase the E-I/O box in order to have the sensor and relay
connection.
The DVR system can connect the external I/O box for extra of I/O devices installation.
1.
Click Add.
2.
Mark Enable box to enable this external I/O box.
3.
Select the Brand of external I/O box from drag down list.
4.
Select the connection type
– Ethernet or RS-232.
5.
For Ethernet connection, enter IP Address of I/O device or click Search IO Device button to
search any I/O device on LAN network.
6.
For RS-232 connection, different brand of external I/O box may have different port parameters.
Please refer to the external I/O box’s user manual for port setting information. Using the default
value if user uses External I/O box of AVer
TM
.
7.
Click OK to save the setting.
8.
To add more than one external I/O box, click Add and follow the above steps.