AVer NXU8000 - Manual (Page 186)

174
5.9.8 To Setup PTZ Preset Point
Beside the PTZ preset point check box, click Detail. In the Trigger PTZ Preset Setting dialog box,
select the PTZ camera number then select the Enable check box. Select the position of the PTZ
camera when the alarm is activated and ended. For the PTZ camera ended point, user also can select
one preset position or Auto Path between preset position group.
5.9.9 To Setup Alarm SOP
Beside the Alarm SOP check box, click Detail. In the step text boxes, type the standard protocol when
the alarm is activated. When the alarm is activated, the Standard Operation Procedure dialog box will
appear. Just click Next to see the next instruction, Back to see the previous instruction, Finish to end
and Abort to terminate.