AVer NXU8000 - Manual (Page 205)

193
8.1.4 To Setup Remote System Setting
There are two type of remote setup mode
– Basic Setting and Advance Setting. Select the setup mode
and click OK to enter setup window.
Basic Setting
Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here
applies to Remote DVR only.
i
Some of settings are not available to the IP camera.
(1)
(2)
(3)
(4)
(6)
(7)
(5)
(8)
(9)
(10)
(1) Camera Name
Select the camera you want to adjust the settings.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Camera Setting
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can