Biamp LTR User Manual
Page 97
Component Objects
Power Entrance:
The Power Entrance provides connection for the appropriate power cord
(included with unit). An internal universal switching power supply accepts 100~240VAC @
50/60Hz, with a maximum power consumption of 65 Watts.
Front Panel Indicators:
The Front Panel Indicators (I/O, Com, & Status) are 2-color LEDs.
The following table lists their behavior:
All LEDs green
Normal operating state. Configuration was successful (if applicable).
Device is in a stable state awaiting commands.
I/O LED red
Internal audio hardware error.
Com LED red
Serial Port error.
Ethernet error.
CAN Bus error.
No IP address defined (cleared by setting IP address).
Status LED red
Configuration error.
Last configuration unsuccessful (cleared by 'reset/initializing' the
device). Operating systems resource error.
File system error.
DSP error.
All LEDs blinking
Operating system is not executing. Device must be power cycled.
Status LED blinking
The firmware has attempted to perform an illegal operation. Device
must be power cycled.
83