Biamp LTR - Manual (Page 207)

System Control
GET 2 AMLVLIN 4 2 would result in the response: 1.0000 this tells us that the
level is currently set to 1dB.
If an incorrect command string is sent, an Nexia will respond with: -ERR
A space normally proceeds the carriage return/line feed in a response to a GET
command, but this space is not present in the standard ‘+OK’ or ‘-ERR’ responses.
Note: SETD, GETD, INCD, DECD, SETLD, and GETLD commands may be used when a ‘full
path’ serial response to the command is desired. A ‘full path’ serial response will provide
identification of the target object, the original command, and the resulting Value. A ‘full path’
response to a valid command will always begin with a pound sign (#) and end normally (as
described above).
Examples:
Command = SETD 1 IPADDR 192.168.1.197
Response = #SETD 1 IPADDR 192.168.1.197 +OK
Command = GETD 1 IPADDR
Response = #GETD 1 IPADDR 192.168.1.197
Command = SETD 1 MMLVLXP 38 1 1 -1.1
Response = #SETD 1 MMLVLXP 38 1 1 -1.1 +OK
Command = INCD 1 MMLVLXP 38 1 1 1.0
Response = #INCD 1 MMLVLXP 38 1 1 -0.1000 +OK
It should be noted that, unlike SETD commands/responses, INCD or DECD commands and
responses will most often contain different Values. This is because SETD commands specify an
exact Value (which will be the same in the response), whereas, INCD and DECD commands
specify a ‘change’ in Value.
Control Dialog - Overview
193