Biamp LTR - Manual (Page 106)

Nexia Manual LTR
Device IO indicates which hardware output is
associated with that software channel. Mute Out
turns the output signal on/off. Level (dB) Out
adjusts the relative output volume. Invert Out
reverses the polarity of the output signal. Full
Scale (dBu) Out
selects the appropriate maximum
output reference level (mic or line).
Each NEXIA VC comes pre-configured from the
factory with a
default system design . If you wish to
load your own custom designed configuration you
will need to
reset/initialize the unit(s) first.
Right-clicking over certain settings will provide a menu of additional options.
VC - Codec In 1 Channel
NEXIA VC hardware is represented in the Layout with as many as seven
separate blocks. Between these blocks can be placed virtually any of the
other available NEXIA mixing, routing, and processing blocks (component
objects). Like other component objects, NEXIA VC blocks can be placed
into the Layout either from the
Processing Library or from the Object
Toolbar . To access VC – Codec In 1 Channel settings, double-click over
the corresponding block in the Layout. This opens a Control Dialog Box
which provides all available settings.
Right-clicking over certain settings will
provide a menu of additional options.
Device IO indicates which hardware input is
associated with that software channel. Gain In
compensates for different line input levels, and
should be set so Peak In flashes only occasionally
(6dB headroom). Mute In turns the input signal
on/off. Level (dB) In adjusts the relative input
volume. Invert In reverses the polarity of the input
signal.
Each NEXIA VC comes pre-configured from the factory with a default system design . If you wish
to load your own custom designed configuration you will need to reset/initialize the unit(s) first.
VC - Codec Out 1 Channel
92