Biamp LTR - Manual (Page 201)

System Control
SET 1 RTRMUTEXP 98 4 5 0
Result: SET 1 RTRMUTEXP 98 4 5 0
Source Selection Attribute Commands Index Value Range
Source SRCSELSRC SET, GET, SETD, GETD 1 0 = No Source/muted
1 = Source 1
2 = Source 2
3 = Source 3
Level SRCSELLVL SET, GET, SETL, GETL, SETD,
GETD 1 -100 ~ 12
Example: Set Device 1 Source Selection Source at Instance 99 Source 2 selected.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 1 SRCSELSRC 99 1 None 2
Result: SET 1 SRCSELSRC 99 1 2
Example: Set Device 1 Source Selection Volume at Instance 99 to -54 dB for source input 3.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 1 SRCSELLVL 99 3 None -54
Result: SET 1 SRCSELLVL 99 3 -54
In this example, Index 1 represents the input source, where in the previous example, Index 1 represents the output
channel.
Delay Blocks
187