Biamp LTR - Manual (Page 107)

Component Objects
NEXIA VC hardware is represented in the Layout with as many as seven
separate blocks. Between these blocks can be placed virtually any of the
other available NEXIA mixing, routing, and processing blocks (component
objects). Like other component objects, NEXIA VC blocks can be placed
into the Layout either from the
Processing Library or from the Object
Toolbar . To access VC – Codec Out 1 Channel settings, double-click
over the corresponding block in the Layout. This opens a Control Dialog
Box which provides all available settings.
Device IO indicates which hardware output is
associated with that software channel. Mute Out
turns the output signal on/off. Level (dB) Out
adjusts the relative output volume. Invert Out
reverses the polarity of the output signal. Full
Scale (dBu) Out
selects the appropriate maximum
line output reference level.
Right-clicking over certain settings will provide a menu of additional options.
Each NEXIA VC comes pre-configured from the factory with a default system design . If you wish
to load your own custom designed configuration you will need to reset/initialize the unit(s) first.
VC Default Configuration
Videoconference System
Each Nexia device comes pre-configured from the factory with a default system design. The
factory default configuration for a NEXIA VC is a 'videoconference system' with 8 automixer AEC
mic inputs, 2 program line inputs, and a codec input feeding a matrix to 4 outputs and a codec
output (see design layout below). This "VC Default Configuration.NEX" file can be found under
Sample Files on the NEXIA software CD. If you wish to load your own custom designed
configuration you will need to
reset/initialize the unit(s) first.
93