Biamp LTR - Manual (Page 190)

Nexia Manual LTR
Last Number
Dialed
TILASTNUM GET None None
Speed Dial
Entry to Dial
TISPEEDDIAL DIAL None 1 ~ 16
Phone Number
to Dial
TIPHONENUM DIAL None enter the phone
number
Redial TILASTDIALED DIAL None none
Note : The TC can insert delay while dialing a phone number by inserting commas where
desired (each comma provides 1 second of delay). Most PBX systems require delay after
acquiring an outside line. Also, multiple TIPHONENUM commands can be used to dial the
individual digits of a phone number. The TIPHONENUM command has a character limit of 32
characters for the "value" field.
Example: Get Device 1 TC Caller ID Information at Instance 23
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
GET 1 TICID 23 None None None
Result: GET 1 TICIDUSER 23
Note: GET 1 TICID 23 will return: "" if there is no caller ID information available. If there is
CID information available, it will return in the format "MMDDHHmmXXXXXXXXXX" where the
"X's" represent the ten digit phone number. For example "040211235035551212".
Example: Get Device 1 TC Full User Caller ID Information at Instance 23
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
GET 1 TICIDUSER 23 None None None
Result: GET 1 TICIDUSER 23
176