Biamp LTR - Manual (Page 25)

Introduction
Select 8
The Select 8 is an external control device, which allows
initiation of eight selectable NEXIA actions. Actions can
be individual or grouped functions within NEXIA. This
includes recalling presets, ducking, combining, etc.
Select 8 components have no Control Dialog Boxes.
They are represented in the layout as a block with eight
control output nodes. These control output nodes are
connected to control input nodes on the other component
blocks to be controlled. These other components may
include
Remote Preset Buttons , Duckers , Room
Combiners , and Logic Boxes . Muting and room
combining routines can also be achieved using presets.
Logic Boxes can provide logic outputs for controlling
additional equipment, external to NEXIA.
Select 8 behavior can be altered using Logic Gates .
Select 8 controls fit most US standard single-gang back-
boxes (back-boxes are available separately from Biamp
Systems). Custom
Control Labels may be printed for the
Select 8.
Please refer to the 'Installation Guide' (included with
controls), or see
Remote Control Bus for more
information. External controls must be identified (see
Device Maintenance ) and associated with their
corresponding component blocks within the layout (see
Equipment Table ).
11