Biamp LTR - Manual (Page 120)

Nexia Manual LTR
Mixers
Mixers
These Component Objects provide typical audio mixing functions, in five categories: Standard
Mixers; Matrix Mixers; Auto Mixers; Mix-Minus Combiners; and Room Combiners. Mix-Minus
Combiners are provided to enhance the capabilities of Auto Mixers in mix-minus and input
expansion applications. Room Combiners are provided to enhance the capabilities of Auto
Mixers in room combining and zone routing applications. Mixers are available in pre-defined
configurations, however, the configuration may be customized when being placed from the
Object Toolbar .
Once a Component Object is placed into the Layout, all available settings can be accessed by
double-clicking over the object. This produces a Control Dialog Box, which displays the
component controls in a more conventional user interface.
see Auto Mixers Control Dialog
see Standard Mixers Control Dialog
see Matrix Mixers Control Dialog
see Mix-Minus Combiners Control Dialog
see Room Combiners Control Dialog
Right-clicking over the object provides a pop-up menu of options. Control Dialog Boxes for
Room Combiner components can be minimized to create user control surfaces (see
Customizing Component Objects ).
Control Dialogs
Auto Mixers
Mute In turns the input signal on/off. Level In
adjusts the relative input volume. Ch / Bus assigns
inputs to the output. Mute Out turns the output
signal on/off. Level Out adjusts the relative output
volume.
Right-clicking over certain settings will provide a
menu of additional options. Unlike other
components, Mixers allow labeling of inputs/outputs
within their dialog boxes. See Channel Identifier
under
Object Property Sheet .
106