Biamp LTR - Manual (Page 58)

Nexia Manual LTR
Set Device ID allows the selected remote device
to be given a name that matches that of the
corresponding block in the design layout file.
Set Lock Code allows the selected
remote device to be assigned password
protection. During normal operation, the
user will be prompted for the password
before being given control access.
Set IP Address allows the selected remote device
to be assigned an IP address. Use the default
setting (which allows the device to obtain an IP
address automatically from a DHCP server on the
network) in most cases, except possibly when
adding RED-1 devices to an existing Ethernet
network.
44