Biamp LTR - Manual (Page 94)

Nexia Manual LTR
Device IO indicates which hardware input
is associated with that software channel.
Gain In
compensates for different input
levels, and should be set so Peak In
flashes only occasionally (6dB
headroom). Mute In turns the input signal
on/off. Level (dB) In adjusts the relative
input volume. Invert In reverses the
polarity of the input signal. Stereo
combines the Level (dB) In adjustment for
the associated left & right inputs.
Right-clicking over certain settings will
provide a menu of additional options.
Each NEXIA PM comes pre-configured
from the factory with a
default system
design . If you wish to load your own
custom designed configuration you will
need to
reset/initialize the unit(s) first.
PM Output (Stereo) 6 Channel
NEXIA PM hardware is always represented in the Layout as three
separate blocks, two for input connections and one for output connections.
Between these blocks can be placed virtually any of the other available
NEXIA mixing, routing, and processing blocks (component objects). Like
other component objects, NEXIA PM blocks can be placed into the Layout
either from the
Processing Library or from the Object Toolbar . To access
Output (Stereo) 6 Channel settings, double-click over the corresponding
block in the Layout. This opens a Control Dialog Box which provides all
available settings.
80