Biamp LTR - Manual (Page 115)

Component Objects
The Receive block provides an output mix of incoming audio and internal
ring tone signals. Also, a Hook Switch (HS) control input node allows
manual answering of incoming calls, and a Ring indication (RI) control
output node provides indication of incoming calls.
Double-clicking the Receive block produces a control
dialog box.
Device IO indicates which hardware connection is
associated with that software block. Auto Answer
selects the number of rings (or OFF) for automatic
answering of incoming calls. Input provides level
adjustment and muting of incoming audio signals.
Ring
provides level adjustment of the internal ring
tone signals for incoming calls. Noise Suppression
enables cancellation of telephone line noise.
The Transmit block provides an input connection for outgoing audio signals.
Double-clicking the Transmit block produces a control dialog box.
Device IO indicates which hardware connection is associated with that
software block. Output provides level adjustment and muting of outgoing
audio signals.
The Dialer block provides several control input nodes: nodes
1~16
trigger corresponding speed-dial numbers; Rdl triggers
redial of last number; HF triggers hook flash; and DM selects
pulse dial mode (not currently supported). A control output
node (D) provides indication of dialing in progress.
Double-clicking the Dialer block produces a control dialog box.
101