Biamp LTR - Manual (Page 188)

Nexia Manual LTR
The following table of Attributes is valid only for Nexia PM Stereo Line Inputs.
PM Stereo Line
Inputs Attribute Commands Index Value Range
Line Input Gain INPGAINPML SET, SETL, GET, GETL,
INC, DEC 1 0, 6, 12, 18
Input Level INPLVLPML SET, SETL, GET, GETL,
INC, DEC 1 -100 ~ 12 *
Input Mute INPMUTEPML SET, GET 1 0 = unmuted
1 = muted
Input Invert INPINVRTPML SET, GET 1 0 = normal
1 = inverted
Line Input Stereo
Linking
INPGANGPML SET, GET 1 0 = separate
1 = ganged
* Can contain a decimal number.
Note: PM Output faders can be ganged as pairs: 1 & 2, 3 & 4, and 5 & 6.
Index2 is used to indicate either one of the Outputs in the pair to be ganged (not both).
Example: Set Device 1 PM Output Gang at Instance 5 Output 2 to ganged (Outputs 1 & 2
ganged).
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 1 OUTGANGPM 5 None 2 1
Result: SET 1 OUTGANGPM 5 2 1
The following table of Attributes is valid only for Nexia TC & Nexia VC AEC Inputs.
AEC Inputs Attribute Commands Index Value Range
Input Gain AECINPGAIN SET, SETL, GET, GETL,
INC, DEC 1 0, 6, 12, 18, 24, 30, 36,
42, 48, 54, 60, 66
Input Level AECINPLVL SET, SETL, GET, GETL,
INC, DEC 1 -100 ~ 12 *
174