Biamp LTR - Manual (Page 186)

Nexia Manual LTR
Attribute
The Attribute defines the portion of the DSP block to be controlled (fader level, crosspoint mute
etc). The following tables show whether each NTP Attribute supports SET/SETL, GET/GETL,
INC, and DEC
Commands , as well as the Value range that the Attribute will accept.
Index1/Index2 determines whether Index1 , Index2 or BOTH are needed for a NTP String to be
complete.
NTP Strings can address: (click on the links to view the tables in each topic)
Input/Output Blocks
Mixer Blocks
Equalizer Blocks
Filter Blocks
Crossover Blocks
Dynamics Blocks
Router Blocks
Delay Blocks
Control Blocks
Meter Blocks
Generator Blocks
Input/Output Blocks
The following table of Attributes is valid for all Nexia input blocks except Nexia PM Stereo Line
Inputs, Nexia TC & Nexia VC AEC Inputs, and Nexia TC & Nexia VC Pre-AEC Inputs.
Analog Inputs Attribute Commands Index Value Range
Input Gain INPGAIN SET, SETL, GET, GETL,
INC, DEC 1 0, 6, 12, 18, 24, 30, 36,
42, 48, 54, 60, 66
Input Level INPLVL SET, SETL, GET, GETL,
INC, DEC 1 -100 ~ 12 *
Phantom Power PHPWR SET, GET 1 0 = off
1 = on
Input Mute INPMUTE SET, GET 1 0 = unmuted
1 = muted
172