Routers, Control dialogs, Router – Biamp LTR User Manual
Page 137: Control dialogs router
Component Objects
Press the "Set Threshold" button, ensuring that the Program Input level is a good
approximation of the highest program signal level you expect will be fed to the ANC. This
process records the levels of both the Ambient and Program inputs. The Ambient
Threshold is set to 10dBu higher than the recorded Ambient level. This process takes up
to 5 seconds.
Set Gain Ratio
Adjust Gain Ratio to specify how many dB of gain is applied for every dBu over Ambient
Threshold the Ambient level is.
Routers
Routers
These Component Objects provide typical audio routing functions. Routers may be connected
between any components within the Layout, for applications which require routing of input
signals to various outputs. Routers are available in pre-defined configurations, however, the
configuration may be customized when being placed from the
Once a Component Object is placed into the Layout, all available settings can be accessed by
double-clicking over the object. This produces a Control Dialog Box, which displays the
component controls in a more conventional user interface.
see Router Control Dialog
see Source Selections Control Dialog
Right-clicking over the object provides a pop-up menu of options.
Control Dialogs
Router
Routers allow each input to be assigned to multiple outputs via In / Out.
However, each output allows only one input assigned at a time.
Therefore, Routers behave like a series of individual distribution
amplifiers. For increased input/output assignment capability, see
.
Right-clicking over certain settings will provide a menu of additional
options.
123