Biamp LTR - Manual (Page 125)

Component Objects
Active Band selects the current band to be adjusted. Center Freq. adjusts the center frequency
for the current band. Gain adjusts the amount of cut or boost applied at the center frequency for
the current band. Bandwidth adjusts the range of frequencies, above & below the center
frequency, which are also affected by the current band. These settings may also be adjusted by
dragging the band controls shown inside the graph. Dragging the white dot affects both Center
Freq. & Gain. Dragging either yellow dot affects Bandwidth. Flatten Band & Flatten All change
the band(s) Gain to '0' (flat). Bypass Band & Bypass All disable the band(s) without changing
settings. Drag Points turns on/off the band controls, revealing the resultant curve only. Band
highlights the current band inside the graph.
Right-clicking over certain settings will provide a menu of additional options.
Graphic Equalizer
Active Band selects the current band to be adjusted. Center Freq. displays the center
frequency for the current band. Gain adjusts the amount of cut or boost applied at the center
frequency for the current band. Active Band and Gain may also be adjusted by dragging the
band controls shown inside the graph. The selected band control becomes yellow, and dragging
it up/down affects Gain for that band. Flatten Band & Flatten All change the band(s) Gain to '0'
(flat). Bypass Band & Bypass All disable the band(s) without changing settings. Drag Points
turns on/off the band controls, revealing the resultant curve only.
Right-clicking over certain settings will provide a menu of additional options.
111