Biamp LTR - Manual (Page 37)

Introduction
The teleconference DSP shall provide eight wide-band AEC balanced
mic/line inputs, two standard balanced mic/line inputs, and four
balanced mic/line outputs on plug-in barrier-strip connectors. A
telephone interface shall be provided on a pair of RJ11 jacks. Inputs
and outputs shall be analog, with internal 24-bit A/D & D/A converters
operating at a sample rate of 48kHz. All internal processing shall be
digital (DSP). NexLink connections shall allow sharing of digital audio
within multi-unit systems.
Software shall be provided for creating/connecting DSP system
components within each hardware unit. Available system components shall
include (but not be limited to) various forms of: mixers, equalizers,
filters, crossovers, dynamics/gain controls, routers, delays, remote
controls, meters, generators, and diagnostics. Ethernet communications
shall be utilized for software control and configuration. After initial
programming, processors may be controlled via dedicated software
screens, third-party RS-232 control systems, and/or optional remote
control devices. Software shall operate on a PC computer, with network
card installed, running Windows® XP Professional/Vista. The DSP
conference system shall be CE marked, UL listed, and carry a five-year
warranty.
The teleconference DSP shall be NEXIA® TC.
Warranty
BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED
WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND
EQUIPMENT DESCRIBED IN THIS MANUAL
1. BIAMP Systems warrants to the original purchaser of new products that the product will be free from defects in
material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAMP Systems
dealer, subject to the terms and conditions set forth below.
2. If you notify BIAMP during the warranty period that a BIAMP Systems product fails to comply with the warranty,
BIAMP Systems will repair or replace, at BIAMP Systems' option, the nonconforming product. As a condition to
receiving the benefits of this warranty, you must provide BIAMP Systems with documentation that establishes that you
were the original purchaser of the products. Such evidence may consist of your sales receipt from an authorized
BIAMP Systems dealer. Transportation and insurance charges to and from the BIAMP Systems factory for warranty
service shall be your responsibility.
3. This warranty will be VOID if the serial number has been removed or defaced; or if the product has been altered,
subjected to damage, abuse or rental usage, repaired by any person not authorized by BIAMP Systems to make
repairs; or installed in any manner that does not comply with BIAMP Systems' recommendations.
23