Biamp LTR - Manual (Page 191)

System Control
Note: GET 1 TICIDUSER 23 will return: "" "" "" if there is no caller ID information available.
The first set of quotes contains the date and time in the format MMDDHHmm. The second set
of quotes represents the incoming phone number in the format 5036417287. The third set of
quotes contains the name of the caller. If there are quotes contained within the name, there
will be a backslash preceding the quotes within the name, i.e. "David \"Dawg\" Grisman".
Example: Set Device 1 TC Speed Dial Entry at Instance 23 Speed Dial 16 to 1-800-826-1457.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
FLASH 1 TILINE 23 None None None
Result: FLASH 1 TILINE 23 (dashes in phone number are optional)
Example: Set Device 1 TC Speed Dial Entry at Instance 23 Speed Dial 16 to 1-800-826-1457.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 1 TISDENTRY 23 16 None 18008261457
Result: SET 1 TISDENTRY 23 16 18008261457 (dashes in phone number are optional)
Example: Dial Device 1 TC Phone Number To Dial at Instance 23 of 1-800-826-1457.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
DIAL 1 TIPHONENUM 23 None None 18008261457
Result: DIAL 1 TIPHONENUM 23 18008261457 (use DIAL instead of SET/GET
commands)
TC Receive Attribute Commands Index Value Range
Receive Level TIRXLVL SET, SETL, GET, GETL,
INC, DEC None -100 ~ 12 *
Receive Mute TIRXMUTE SET, GET None 0 = unmuted
1 = muted
Number of TIAUTOANSWER SET, GET None 0 = off
177