HP Anab EQ5 - Manual (Page 46)

EQ5 AC Drive Operations Manual
_______________________________________________________________________
TECO – Westinghouse Motor Company Verify Data & Error Processing 40
RUN FWD
PRG PRG MENU
F / D LED SHIFT
PRG
6.LOAD FCTR
7.ALM INF
8.ALM CAUSE
9.DATA COPY
1. Data Change Disabled During Operation
If a write operation is attempted during a drive
operation, or vice versa, the error message
below will appear. After stopping the drive
and pressing retry the operation.
Verify Data
COMPLETE
FUNC
DATA
FUNC
DATA
Error Processing
FUNC
DATA
30 HP-2
WRITE
ERR-F25
RESET
30 HP-2
READ
30 HP-2
VERIFY
30 HP-2
VERIFY
30 HP-2
WRITE
INV RUNNING
2. Memory Error
If a write operation is attempted while data has
not been saved (i.e. no data) in the Digital
Operator memory during the read mode or
when the drive types do not match, the
following error message will appear.
30 HP-2
WRITE
MEMORY ERROR
3. Verify Error
During a data check (Verify) operation, if the
data stored in the Digital Operator differs from
that stored in the drive, the following error
message is displayed to indicate the function
number. The data check stops at the first
mismatch. To continue the data check press
until another mismatch is displayed or is
complete. To stop the data check and switch
to another operation, press .
RESET