HP Anab EQ5 - Manual (Page 36)

EQ5 AC Drive Operations Manual
______________________________________________________________________
TECO – Westinghouse Motor Company LED Monitor Display & Program Menu Screen 30
4-3 Digital Operator Keypad Navigation
4-3-1 Operation Mode
The LCD screen for normal inverter operation displays the inverter operating status and an
operation guide. A second screen is available which graphically displays the operating status
in the form of a bar graph. Switching between screens is possible by setting the value of parameter
E45 (=1 operation guide), (=2 bar graph).
1) Operation status (E45=0)
RUN FWD
PRG PRG MENU
F / D LED SHIFT
STOP FWD
PRG PRG MENU
F / D LED SHIFT
2) Bar graph (E45=1)
Output frequency (maximum frequency at full scale)
Output current (200% of inverter rating at full-scale)
Torque calculation (200% of inverter rating at full-scale)
Fout/Iout/TRQ
Hz
A
%
1) Output frequency control set by Digital operator (F01=0 or C30=0)
RUN FWD
PRG PRG MENU
F / D LED SHIFT
LOCAL
0.00 ~ 60.00
F / D STORE
< DIG. SET Hz >
LOCAL
0.00 ~ 60.00
F / D STORE
< DIG. SET Hz >
2) Output frequency set by external source (F01 ≠0)
RUN FWD
PRG PRG MENU
F / D LED SHIFT
12+V1
< REMOTE REF >