HP Anab EQ5 - Manual (Page 34)

EQ5 AC Drive Operations Manual
______________________________________________________________________
TECO – Westinghouse Motor Company Key Functions, LCD Screen Structure & Alarm Modes 28
Table 4-1-1 Functions of Operation Keys
Operation Key Main Function
Used to switch the current screen display to the menu screen or switch to the initial
display screen in the operation/trip mode.
Used to switch the LED monitor or to determine the entered frequency, function code,
or data.
Used to change data, move the cursor up or down, or scroll the display screen.
Used to move the cursor horizontally when changing data. When this key is pressed
with the up or down key, the cursor moves to the next parameter function block.
Used to cancel the current input data and switch the display screen. If an alarm occurs,
this key is used to reset the trip status (valid only when the alarm mode initial screen is
displayed).
STOP
Used to switch normal operation mode to jogging operation mode or vice versa. The
selected mode is displayed on the LCD screen.
STOP + RESET
Switches the operating mode from digital operator to terminal block operation (Local /
Remote), and vice versa. When these keys are operated, function F01 data is
automatically set to 3 if set at 0, or automatically set to 0 if set from 1 thru 4. The
selected mode is displayed on the LCD screen.
4-2 Digital Operator LCD Screen Operating Structure
4.2.1 Normal Operation
The Digital operator LCD operating structure.
PRG
Program Menu Operating Mode
Screen for each
function
Supplementary
Screen
RESET
FUNC
DATA
RESET RESET
FUNC
DATA
FUNC
DATA
PRG
4.2.2 Alarm modes
If an alarm is activated, operation is changed from normal digital operator function to alarm mode
operation. The alarm mode screen appears and alarm information is displayed.
The program menu, function screens, and supplementary screens remain unchanged as during
normal operation, though the switching method from program menu to alarm mode is limited to
.