HP Anab EQ5 - Manual (Page 111)

EQ5 AC Drive Operations Manual
_________________________________________________________________________
TECO – Westinghouse Motor Company Standard Specifications Notes con’t 10
5
EQ5 CT (Constant Torque) – 460V Series
Type Nema 1 Open Chassis
Applied Motor
Nominal (HP)
0.5 1 2 3 5 5 7.5 10 15 20 25 30 30 40 50 60 75 100 125 150 200 250 300 350 350 400 450 500 600
Type
EQ5-4XXX-XX 0P5
-N1
001-
-N1
002-
-N1
003
-N1 005
-N1 005
-N1 010
-N1 015
-N1 020
-N1 025
-N1 030
-N1 032
-N1 040
-C
050
-C
060
-C
075
-C
100
-C
125
-C
150
-C
200
-C
250
-C
300
-C
350
-C
400
-C
450
-C
500
-C
600
-C
700
-C
800
-C
Rated capacity
[kVA] (*1)
1.2 2.0 2.9 4.4 7.2 7.2 10 14 19 24 31 36 36 48 60 73 89 120 140 167 202 242 300 331 331 414 466 518 590
Rated output
current [A] (*2)
1.5 2.5 3.7 5.5 9 9 13 18 24 30 39 45 45 60 75 91 112 150 176 210 253 304 377 415 415 520 585 650 740
Overload
capability 150% of rated output current for 1 min.
200% of rated output current for 0.5 s 150% of rated output current for 1 min.
180% of rated output current for 0.5 s
Starting torque 200% or more (under torque vector control) 180% or more (under torque vector control)
Outpu
t
rating
s
Rated output
Voltage [V] (*3)
3-phase, 380V, 400V, 415V(440V)/50Hz, 380V, 400V, 440V, 460V/60Hz
Rated output
frequency [Hz]
50,60Hz
Inpu
t ra
ting
s
Phases, voltage,
frequency
3-phase,380 to 480V,50/60Hz
3-phase, 380 to 440V/50Hz (*5)
3-phase, 380 to 480V/60Hz
Voltage/frequency
variations
Voltage: +10% to -15% (Imbalance rate between phases: 2% or less (*5) , Frequency: +5% to -5%
Momentary
voltage dip
capability (*6) Operation will continue with 310V or more. If voltage drops below 310V, operation will continue for up to 15 ms.
If "Continuous operation" is selected, the output frequency will be lowered to withstand the load until normal voltage is resumed.
Required power
supply capacity
[kVA] (*7)
0.7 1.2 2.2 3.1 5.0 5.0 7.2 9.7 15 20 24 29 29 38 47 57 70 93 111 136 161 196 244 267 267 341 383 433 488
EQ5 VT (Variable Torque) – 460V Series
Type Nema 1 Open Chassis
Applied Motor
Nominal (HP)
0.5 1 2 3 5 7.5 10 15 20 25 30 30 40 50 60 75 100 125 150 200 250 300 350 400 450 500 600 700 800
Type
EQ5-4XXX-XX 0P5
-N1
001-
-N1
002-
-N1
003
-N1 005
-N1 005
-N1 010
-N1 015
-N1 020
-N1 025
-N1 030
-N1 032
-N1 040
-C
050
-C
060
-C
075
-C
100
-C
125
-C
150
-C
200
-C
250
-C
300
-C
350
-C
400
-C
450
-C
500
-C
600
-C
700
-C
800
-C
Rated capacity
[kVA] (*1)
1.2 2.0 2.9 4.4 7.2 10 13 18 24 29 35 36 48 60 73 89 120 140 167 202 242 300 331 386 414 518 590 669 765
Rated output
current [A] (*2)
1.5 2.5 3.7 5.5 9 12.5 16.5 23 30 37 44 45 60 75 91 112 150 176 210 253 304 377 415 485 520 650 740 840 960
Overload
capability
110% of rated output current for 1 min.
Starting torque 50% or more
Outpu
t
rating
s
Rated output
voltage [V] (*3)
3-phase, 380V, 400V, 415V(440V)/50Hz, 380V, 400V, 440V, 460V/60Hz
Rated output
frequency [Hz]
50,60Hz
Inpu
t ra
ting
s
Phases, voltage,
frequency 3-phase,380 to 480V,50/60Hz 3-phase, 380 to 440V/50Hz (*4)
3-phase, 380 to 480V/60Hz
Voltage/frequency
variations
Voltage: +10% to -15% (Imbalance rate between phases: 2% or less (*5) , Frequency: +5% to -5%
Momentary
voltage dip
capability (*6) Operation will continue with 310V or more. If voltage drops below 310V, operation will continue for up to 15 ms.
If "Continuous operation" is selected, the output frequency will be lowered to withstand the load until normal voltage is resumed.
Required power
Supply capacity
[kVA] (*7)
0.7 1.2 2.2 3.1 5.0 7.2 9.7 15 20 24 29 29 38 47 57 70 93 111 136 161 196 244 267 341 383 433 488 549 610
(*1) Indicated capacities are at the rated output voltage 230V for the 230V series and 460V for the 460V series. The rated capacity will be lowered if the
supply voltage is lower.
(*2) In the case of a low impedance load, such as a high-frequency motor, the current may drop below the rated value.
(*3) The output voltage cannot exceed the input supply voltage.
Cont.