HP Anab EQ5 - Manual (Page 7)

EQ5 AC Drive Operations Manual
_________________________________________________________________________
TECO – Westinghouse Motor Company Receiving and Handling 1
1. Before Using This Product
1-1 Receiving Instructions
Unpack and check the product as explained below.
If you have any questions about the product,
contact the nearest TWMC sales office or your
local distributor where you purchased the unit.
1. Check the ratings on the nameplate to confirm
that the delivered product is the one that was
ordered.
TYPE : Inverter type
SOURCE : Power rating
OUTPUT
: Output rating
MASS : Mass (not indicated for products with 30HP/CT, 40HP/VT or less)
SER.No. : Serial number
8 5 XXXXXXXXXXXXX
Production lot serial number
Production month:1 to 9: January to September,
X: October, Y: November, Z: December
Production year: Last digit of year (7 --> 2007)
2. Check for damaged and/or missing parts.
3. In addition to the drive unit and this manual, the package contains rubber bushings (for products of
30HP/CT, 40HP/VT or less) and a terminating resistor (1/2 W, 120 Ω) which is packed separately. The
terminating resistor for products rated 40HP/CT, 50HP/VT or more, is installed internally. The
terminating resistor is required for RS485 communication and can remain installed regardless of RS-
485 communication status.
1-2 Appearance
Mounting screws of surface cover
Digital Operator
Digital Operator
Mounting screws of
surface cover
(6 screws total)
Ratings nameplate
Surface cover
Intermediate cover
Surface cover
30HP/CT, 40HP/VT or Less 40HP/CT, 50HP/VT or More