HP Anab EQ5 - Manual (Page 22)

EQ5 AC Drive Operations Manual
______________________________________________________________________
TECO – Westinghouse Motor Company Power Terminal Designations & Wiring 16
The connectors are mounted on the power
PCB above the control PCB as shown on the
right.
EQ5-4040-C to EQ5-4200-C
EQ5-2040-C to EQ5-14150-C
Note:
To remove a connector, squeeze the locking
mechanism and pull. To mount a connector,
push the connector down until it locks (clicks).
EQ5-4250-C to EQ5-4900-C
When shipped from the factory, CN UX is connected to U1 and CN RXTX is connected to
L1/R-L3/T.
Fig. 2-3-7 (CN UX) and (CN RXTX) Connector Locations and Orientation