HP Anab EQ5 - Manual (Page 126)

EQ5 AC Drive Operations Manual
__________________________________________________________________________
TECO – Westinghouse Motor Company Options 120
9. Options
The inverter supports two internally mounted cards. One option card is mounted under the main cover
(Location A) and the other option card is mounted in a special adapter under the keypad (Location B).
Only one card can be mounted in these locations. There are two different types of option cards, Type 1
and Type 2. You cannot use two Type 1 or Two Type 2 cards but you can mix any combination of Type
1 and Type 2 provided you only have one option per mounting location. Each option card must be
mounted in the designated location. The chart below lists the option card, their types, and their
mounting locations.
Name Type Loc.
2nd
Option
Type/Loc
Function
OPC-G11S-RY
(Relay output card)
1 A 2/B
• Relay output card
The transistor output from the inverter control
output terminals Y1 and Y4 are converted to
the relay output (1SPDT).
OPC-G11S-DIO
(Digital interface card)
2 A None
• Frequency setting by binary code (max. 16 bits)
• Monitoring (8 bits) of frequency, output current,
and output voltage
OPC-G11S-AIO
(Analog interface card) 2 A None
• Auxiliary input for analog frequency setting (0 to
+/-10 V)
• Monitoring of inverter output frequency, current,
and torque in analog voltage, analog output 0-
10 VDC and 4-20mA
OPC-G11S-PDP
(Communication card)
2 B 1/A
• Serial communication card for Profibus-DP
OPC-G11S-DEV
(Communication card)
2 B 1/A
• Serial communication card for Device Net
OPC-G11S-COP
(Communication card)
2 B 1/A
• Serial communication card for CAN
OPC-G11S-MBP
(Communication card)
2 B 1/A
• Serial communication card for Modbus plus
OPC-G11S-IBS
(Communication card)
2 B 1/A
• Serial communication card for Interbus-S