Casio FX-CG10 - Manual (Page 571)

20100801 20100801
ε
-26
Using Setup Memory
• To change the name of setup data
1. On the E-Con2 main menu (page
ε
-1), press
2(MEMORY) to display the setup memory
list.
2. Use the f and c cursor keys to highlight the name of the setup you want.
3. Press
3(RENAME).
• This displays the screen for inputting the setup name.
4. Input up to 18 characters for the setup name, and then press
w.
• This changes the setup name and returns to the setup memory list.
• To delete setup data
1. On the E-Con2 main menu (page
ε
-1), press
2(MEMORY) to display the setup memory
list.
2. Use the f and c cursor keys to highlight the name of the setup you want.
3. Press
4(DELETE).
4. In response to the confirmation message that appears, press
1(Yes) to delete the
setup.
• To clear the confirmation message without deleting anything, press
6(No).
• To recall setup data
Recalling setup data stores it in the current setup memory area. You can then use Advanced
Setup to edit the setup. This capability comes in handy when you need to perform a setup
that is slightly different from one you have stored in memory.
1. On the E-Con2 main menu (page
ε
-1), press
2(MEMORY) to display the setup memory
list.
2. Use the f and c cursor keys to highlight the name of the setup you want.
3. Press
5(LOAD).
4. In response to the confirmation message that appears, press
1(Yes) to recall the setup.
• To clear the confirmation message without recalling the setup, press
6(No).
Note
• Recalling setup data replaces any other data currently in the current setup memory area.