Casio FX-CG10 - Manual (Page 418)

11-8
k Copying Data
u To copy from main memory to storage memory
The following procedure saves the selected data into a single file. You assign a name to the
file, which is stored in storage memory.
1. On the main memory information screen, select the data you want to copy.
2. Press
2(COPY).
• This displays the folder selection screen. “ROOT” is the
storage memory root directory.
3. Specify the folder you want.
• Highlight ROOT to copy the data to the root directory.
• To copy the data to a specific folder, use f and c to move the highlighting to the
desired folder and then press
1(OPEN).
4. Press
1(SAVE
• AS).
• This displays the file name input screen.
5. Input the file name you want to give to the file.
• To cancel the copy operation, press
J.
6. Press
5(g3m) or 6(g2m) as required to specify the file format.
• g3m is the fx-CG10/fx-CG20 file type. g2m is the file format used to transfer data to the
fx-9860G II and other older model calculators via Program-Link Software (FA-124).
7. Press
w to copy the data.
• The message “Complete!” appears when the copy operation is complete.