Yaskawa GPD503 Drive - Manual (Page 99)

3.5 DRIVE MODE OPERATION
A. Changing Display With DSPL Key:
ACTION DESCRIPTION DISPLAY
Apply Power DRIVE lamp is on.
— If the GPD 503 fault circuit detects
a fault, a blinking Fault code will be
displayed for 5 seconds.
— Then the Frequency Reference (An-01)
value appears.
Press DSPL Display changes to present Output
Key Frequency value.
Press DSPL Display changes to present Output
Key Current value.
Press DSPL Display changes to last Fault code.
Key (If no fault has occurred, cycle
skips to next display).
EXAMPLE:
Main Circuit
UV Trip
Press DSPL Display changes to first Monitor
Key Displays number.
Press DSPL Display changes to first Frequency
Key Reference Memory Settings constant
number.
Press DSPL Display changes to first Run Oper-
Key ative Settings constant number.
Press DSPL Cycle begins again with Frequency
Key Reference display.
* Use ^ key to step through the list of constants, and
DATA key to display An- or bn- set value, or information
called for by Un- constant.
F 0 0.0 0
0.0 0
0.0 A
U 1 U u 1
U n - 0 1
A n - 0 1
b n - 0 1
3-7
*
*
*