Yaskawa GPD503 Drive - Manual (Page 133)

CONSTANT SET FACTORY USER PARA.
NUMBER DATA NAME DIGIT DATA FUNCTION SETTING SETTING REF.
Sn-26 Digital Speed XXXX 0000 = BCD input, 1% accuracy 0000 Separate
Reference 0001 = BCD input, 0.1% accuracy Option
(DI-08) 0010 = BCD input, 0.01% accuracy Instruction
Frequency 0011 = BCD input, 1Hz Sheet
reference 0100 = BCD input, 0.1Hz
set mode 0101 = BCD input, 0.01Hz
selection
0110 = Reserve
0111 = Binary input, 255 / 100%
1000 = Binary input (set value
displayed in decimal on
Digital Operator)
Sn-27 Digital Output XXXX 0 DO-08 output signal 0010 Separate
Card (DO-08) combination 1 (output Option
data fixed) Instruction
Sheet
1 DO-08 output signal
combination 2 (encoded
output)
Pulse Monitor XXXX Number of 000 = 1F Separate
(PO-36F) output 001 = 6F Option
pulses 010 = 10F Instruction
selection 011 = 12F Sheet
100 = 36F
Sn-28 Analog Monitor XXXX Select item to 00 = Output 0100 Separate
(AO-08 or output from frequency (max. Option
AO-12) channel 1 frequency /100%) Instruction
01 = Output current Sheet
(rated current
XXXX Select item to /100%)
output from 10 = Output voltage
channel 2 ref. (input
voltage /100%)
11 = DC voltage [Vpn]
(400V /100%)
[230V drives]
(800V /100%)
[460V drives]
(1000V /100%)
[575V drives]
Table A1-3. System Constants (Sn-XX) - Continued
CONSTANT SET FACTORY USER PARA.
NUMBER DATA NAME DIGIT DATA FUNCTION SETTING SETTING REF.
A1-9