Yaskawa GPD503 Drive - Manual (Page 137)

CONSTANT INCRE- SETTING FACTORY USER PARA.
NUMBER DATA NAME MENT RANGE SETTING SETTING REF.
Cn-37 Momentary Power Failure 0.1 s 0.0 - 2.0 – –
Ride-thru Time See Note 3
Cn-38 Speed Search Operation Level 1 % 0 - 200 150 2.28B
Cn-39 Speed Search Decel Time 0.1 s 0.0 - 25.5 2.0 2.28C
See Note 5
Cn-40 Min. Base Block Time 0.1 s 0.0 - 5.0 See Note 3 2.28D
Cn-41 V/f During Speed Search 1 % 0 - 100 100 2.28E
Cn-42 Voltage Recovery Time 0.1 s 0.1 - 5.0 0.3 2.28F
NOTES:
1. Initial value differs depending on V/f curve selected (Sn-02 set value). Values shown are initial values
when Sn-02 is set to 0F .
2. Motor rated current (Cn-09) is the 100% level. Setting range: 10 to 200% of GPD 503 rated current.
3. Initial value depends on GPD 503 capacity.
4. Set value
) 50%: carrier frequency = 8 KHz; set value > 50%: carrier frequency = 1 KHz.
5. If set to zero, speed search will be disabled.
Table A1-4. Control Constants (Cn-XX) - Continued
CONSTANT INCRE- SETTING FACTORY USER PARA.
NUMBER DATA NAME MENT RANGE SETTING SETTING REF.
A1-13