Yaskawa GPD503 Drive - Manual (Page 126)

CONSTANT INCRE- SETTING FACTORY USER PARA.
NUMBER DATA NAME MENT RANGE SETTING SETTING REF.
bn-01 Accel Time 1 0.1 s 0.0 - 6000.0 10.0 2.2A, 2.2C,
2.18
bn-02 Decel Time 1 0.1 s 0.0 - 6000.0 10.0 2.2A, 2.2C,
2.18
bn-03 Accel Time 2 0.1 s 0.0 - 6000.0 10.0 2.2A, 2.2C,
2.18
bn-04 Decel Time 2 ( also Emergency 0.1 s 0.0 - 6000.0 10.0 2.2A, 2.2C,
Stop Decel Time ) 2.18
bn-05 Frequency Command Gain 0.1 % 0 - 1000.0 100.0 2.13
bn-06 Frequency Command Bias 1 % –100 to 100 0 2.13
bn-07 Torque Compensation Gain 0.1 0.0 - 2.0 1.0 2.31
bn-08 Slip Compensation Gain 0.1 % 0.0 - 9.9 0.0 2.26,
(Motor Rated Slip) 2.35
bn-09 Energy Saving Gain 1 % 0 - 200 80 2.11
bn-10 Monitor No. After Power-up 1 1 - 3 1 2.10
bn-11 Analog Monitor Channel 0.01 0.01 - 2.55 1.00 2.20 (1)
1 Gain
bn-12 Analog Monitor Channel 0.01 0.01 - 2.55 0.50 (1)
2 Gain
(1) Refer to separate Option Instruction Sheet.
CONSTANT INCRE- SETTING FACTORY USER PARA.
NUMBER DATA NAME MENT RANGE SETTING SETTING REF.
CONSTANT INCRE- SETTING FACTORY USER PARA.
NUMBER DATA NAME MENT RANGE SETTING SETTING REF.
Table A1-2. Run Operative Settings (bn-XX)
A1-2