Yaskawa GPD503 Drive - Manual (Page 131)

CONSTANT SET FACTORY USER PARA.
NUMBER DATA NAME DIGIT DATA FUNCTION SETTING SETTING REF.
Sn-13 Protective XXXX — Not Used 0100 – –
Character-
istics
XXXX Condition when cooling fan failure – –
Select 4 is detected:
(Overload / 00 = Ramp to stop (major failure)
Fan Fault 01 = Coast to stop (major failure)
Protection) 10 = Emergency stop (major
failure)
Time to stop
determined by
bn-12 set value
11 = Continue operation
(minor failure)
Sn-14 Protective XXXX 0 Electronic thermal motor 0000 2.30
Character- protection enabled
istics
Select 5
1 Electronic thermal motor
(Motor
protection disabled
Protection) XXXX 0 Electronic thermal
protection for
variable torque
1 Electronic thermal
protection for
constant torque
XXXX 0 Short time rating disabled
1 Electronic thermal protection
- short time rating enabled
(Drive XXXX 0 OL = 103% continuous,
(Protection) z 150% for one minute
1 OL = 113% continuous,
125% for one minute
z This digit is “Not Used” in 230V, 30HP (CT) and below; 460V, 60HP (CT)
and below; 575V, 25HP (CT) and below.
Table A1-3. System Constants (Sn-XX) - Continued
CONSTANT SET FACTORY USER PARA.
NUMBER DATA NAME DIGIT DATA FUNCTION SETTING SETTING REF.
A1-7
Changed 6/29/94