Yaskawa GPD503 Drive - Manual (Page 11)

INSTALLATION REFERENCE SHEET
• Drive Information: • Motor Nameplate Information:
Model Number ______________ Full Load Amps ______________
Specification ______________ Voltage ______________
Voltage ______________ Horsepower ______________
kW ______________ Poles ______________
Number ______________ RPM ______________
Location ______________ Service Factor ______________
Drive Rated Amps NEMA Design ______________
Variable Torque – 125% OL ______ Insulation Class ______________
Constant Torque – 150% OL ______ TEFC ___ or TENV ___
EPROMs ______________ Disconnect at Motor _______
I/O Boards ______________ Single/Multiple Motor _________
V/Hz Pattern ______________ Pulse Generator ______________
Speed/Torque Regulation _______ Location ______________
Pulse Generator Input __________ Number ______________
Thermal Motor Overload
Protection – Sn-14 ______
Motor Rated Current – Cn-09 _______
• Load / Machine: • Control:
Torque Requirements as % of Controlled Variable (Pressure, Flow, Temp,
Full Load Torque: Level, etc.) ______________
Breakaway ______ Sensor ______________
Running ______ Location ______________
Peak ______ Number ______________
Speed Range ______________ Output ______________
Gear/Pulley Ratio _____________ Run/Stop:
Speed/Torque Controlled ________ 2-Wire ___ or 3-Wire ___ Contro
Accuracy Required _____________ Location(s) ______________
Inertia ______________ Numbers ______________
Location ______________ Speed Reference: 0-10 Vdc ___
Number ______________ or 4-20 mA ___
• Power Supply: • Auxiliary Devices:
Circuit Breaker / Amps __________ Reactors
Disconnect / Fused __________ Input _______
Location _______________ Outptu _______
Number _______________ Filters
Source _______________ Input _______
Voltage _______________ Output _______
Frequency _______________ Bypass _______
Quality _______________
- x -