Yaskawa GPD503 Drive - Manual (Page 78)

2.28 SPEED SEARCH Continued
RUN
SIGNAL
SPEED SEARCH
MAX FREQ., OR FREQ.
REF. WHEN SPEED
SEARCH IS INPUTTED
OUTPUT FREQUENCY
VOLTAGE AT
SPEED SEARCH
OUTPUT VOLTAGE
0.5 SEC
BASE
BLOCK
SPEED SEARCH
OPERATION
WITHIN 0.5 SEC
NOTE: When continuous operation mode at momentary stop function is selected,
the Speed Search command must be enabled.
Speed Search Operation Timing
2-42.1
SPEED COINCIDENCE
POINT
RETURN TO
NORMAL V/f
OUTPUT