Yaskawa GPD503 Drive - Manual (Page 74)

2.24 REMOTE/LOCAL AND REFERENCE SELECTION Continued
Mode 5
The final consideration for multiple frequency command configuration modes is that any
combination of binary weighted values may be configured for operation. As an example, if
only three speed references are required, then the following example will work.
Sn-04 = local operation.
Sn-15 = frequency reference select 1 at terminal 5.
Sn-16 = frequency reference select 2 at terminal 6.
Sn-19 = manual reference at terminal 16.
2-WIRE CONTROL
Sn-04 = X X X 1
Sn-15 = 03
Sn-16 = 04
Sn-19 = 00
Freq. External Terminal
Ref. 8 7 6 5
An-01 0 0 0 0
Manual 0 0 0 1
(Multi-func.)
An-03 0 0 1 0
Freq. External Terminal
Ref. 8 7 6 5
2-39