HEIDENHAIN MANUALplus 4110 Pilot - Manual (Page 99)

99
Lat
er
al-surf
ace mac
hining
Contour start point/Lateral-surface rapid traverse G110
Geometry: G110 defines the starting point of a lateral-surface contour.
Parameters
Z, C:
Target point, target angle
CY: Target point as length value
Machining: The tool moves at rapid traverse along the shortest path to
the target point.
Parameters
Z, C:
Target point, target angle
CY: Target point as length value
X: Target point (diameter) – default: current X position
Reference diameters G120
G120 determines the reference diameter of the “unrolled surface
area“. Program G120 if you use “CY“ with G110 to G113. G120 is modal.
Parameter
X:
Diameter