HEIDENHAIN MANUALplus 4110 Pilot - Manual (Page 16)

16
Clearance cycle group
Cut longitudinal
Cut transverse
Roughing (expanded): The cycle machines the defined area, taking
the optional contour elements into account.
Finishing (expanded): The cycle finishes the defined contour section,
taking the optional contour elements into account.
Information on cycle parameters:
B:
Chamfer or rounding at end of contour
•
B>0: Rounding radius
• B<0: Chamfer width
Roughing:
• The cycle does not take oversizes into account in normal
mode.
Finishing:
• In the normal mode the tool returns to the “start point X, Z“.
• In the expanded mode the tool remains at the cycle end
position.