HEIDENHAIN MANUALplus 4110 Pilot - Manual (Page 53)

53
Linear path G1
The tool moves linearly at the feed rate to the “end point“.
Parameters
X, Z:
End point (X diameter)
A: Angle (angular direction): see graphic support window
B: Chamfer/rounding
• B left undefined: angential transition
• B=0: Nontangential transition
• B>0: Rounding radius
• B<0: Chamfer width
E: Special feed rate – no input: active feed rate
Q: Point of intersection – default: Q=0
Simple Linear and Cir
cular P
a
ths