HEIDENHAIN MANUALplus 4110 Pilot - Manual (Page 98)

98
End-f
ace mac
hining
Figure definition end-face polygon G307
G307 defines a polygon on an end face. Program this figure together
with G793 or G797.
Parameters
XK, YK:
Center point
Q: Number of edges (3
† Q † 127)
A: Angle – Reference: see support graphics
K: Width across flats(KW)/length
• K<0: Width across flats
• K>0: Edge length
R: Chamfer/rounding
• R<0: Chamfer length
• R>0: Rounding radius